The installation-friendly hammerset anchor for multiple fixings

Nail anchor FNA II-H / FNA II-OE

Name: Nail anchor FNA II-H / FNA II-OE
Brand: fischer

The fischer nail anchor FNA II-H with hook and FNA II-OE with eye are made from zinc-plated steel. They are primarily suitable for the anchoring of wire and nonious hangers indoors. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is set with a few hammer blows in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Variantet e produktit

Download of image data

Variantet e produktit

Miratimet / Raportet e testimit

2 variante produktesh

Anchor length

Drill diameter

Min. drill hole depth for through fixings

Inner diameter of the hook/eye

Packaging

Amount

Legjenda = Miratimi ekziston— = Miratimi nuk ekziston

Gesehen 2 von 2 Variante(n)

Advantages

The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Approved for:

Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications

Also suitable for:

Solid sand-lime brick
Natural stone with dense structure
Prestressed hollow-core concrete slabs

Detajet (materialet e ndërtimit, ngarkesat, etj.) të çdo miratimi të disponueshëm zbatohen. Dokumentet e mëtejshme mund të gjenden në Qendra e shkarkimit.

Miratimet

ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1

Functionality

The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation.
The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.

Mounting Strip 1 Picture

1 / 4

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

Krijuar me 02.03.2021

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

Krijuar me 16.03.2021

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

Krijuar me 05.10.2021

Load Table

pdf,

Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Komponentët e sistemit

Kategori identike produktesh

ETA-approval
Anchor length ( l )	54 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	35 mm
Inner diameter of the hook/eye ( d_H )	10 mm
Packaging	Folding box
Amount	50 pcs.
Packaging	—
GTIN (EAN-Code)	4006209441275

ETA-approval	—
Anchor length ( l )	54 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	35 mm
Inner diameter of the hook/eye ( d_H )	10 mm
Packaging	Folding box
Amount	50 pcs.
Packaging	—
GTIN (EAN-Code)	4006209441268

Nail anchor FNA II-H / FNA II-OE

Variantet e produktit

Përparësitë / Përshkrimi

Aplikimi dhe leja (autorizimi)

Manuali i montimit

Dokumente për shkarkim