The economical solution for the repair of triple-skin outer wall panels

Weather facing reconstruction system FWS II

Name: Weather facing reconstruction system FWS II
Brand: fischer

The fischer weather facing wall tie FWS II is a system for the post-installation securing of triple-skin outer wall panels made from concrete. The system consists of the stainless steel weather facing wall tie FWS II and the fischer injection mortar FIS V and FIS V Plus. The expansion-free load application with the fischer injection mortar enables anchoring in facing masonry with a 80 mm thickness. The fischer FWS II is secured in the load-bearing layer in the weather facing using the injection mortar. The plastic coating protects the insulation from being penetrated with mortar. The large anchor diameter means that FWS II achieves a high shear load resistance. This reduces the number of required wall ties per panel, which saves on costs.

Variantet e produktit

Download of image data

Variantet e produktit

Miratimet / Raportet e testimit

3 variante produktesh

Total length

Nom. drill diameter

Effect. anchorage depth in the load-bearing skin

Anchor per 360 ml-cartridge

Amount

GTIN (EAN-Code)

Legjenda = Miratimi ekziston— = Miratimi nuk ekziston

Gesehen 3 von 3 Variante(n)

Advantages

The FWS II achieves a high shear load-bearing capacity due to its large anchor diameter. This reduces the number of reconstruction anchors needed for each plate to a minimum, thus saving costs.
The drill hole can be drilled in one step using standard diamond drill bits. This ensures quick progress is made.
Installation is already approved from a sub-base thickness ≥ 80 mm.
Approval with a new measuring strategy allows a safer and economically static calculation while making it possible to document loads from temperature changes.

Functionality

The FWS II weather facing reconstruction anchors can be bedded in mortar into the load-bearing skin and weather shell with the FIS V Plus, FIS VW Plus or FIS VS Plus / FIS V, FIS VW or FIS VS injection mortar.
The red plastic coating protects the insulation from being penetrated with mortar.
You can see the correct anchor filling with the weather shell through the inspection openings on the head of the anchor.

Mounting Strip 1 Picture

1 / 8

1
2
3
4
5
6
7
8

Komponentët e sistemit

Hammer drill bit Quattric II S / Quattric II
92 variantet

DIBt-approval
Total length ( l )	180 mm
Nom. drill diameter ( d_B )	40 - 41 mm
Effect. anchorage depth in the load-bearing skin ( h_v )	70 mm
Anchor per 360 ml-cartridge	5
Amount	5 pcs.
GTIN (EAN-Code)	4048962219814

DIBt-approval
Total length ( l )	205 mm
Nom. drill diameter ( d_B )	40 - 41 mm
Effect. anchorage depth in the load-bearing skin ( h_v )	70 mm
Anchor per 360 ml-cartridge	5
Amount	5 pcs.
GTIN (EAN-Code)	4048962219821

DIBt-approval
Total length ( l )	230 mm
Nom. drill diameter ( d_B )	40 - 41 mm
Effect. anchorage depth in the load-bearing skin ( h_v )	70 mm
Anchor per 360 ml-cartridge	5
Amount	5 pcs.
GTIN (EAN-Code)	4048962219838

Weather facing reconstruction system FWS II

Variantet e produktit

Përparësitë / Përshkrimi

Aplikimi dhe leja (autorizimi)

Manuali i montimit

Dokumente për shkarkim