Nr. i Art. 546455

fischer Render fixing FIF-CN II 8/300

Top Features

Fewer plugs per square metre: high load absorption due to innovative plastic nails with steel tips.
Hammerset installation saves time.
Low setting depth reduces amount of drilling. This saves time and costs.
No premature expansion of hammer-in stop.
No marks on the plaster surface. Glass fibre reinforced plastic nail with steel point reduces heat transmission.

The pre-assembled anchor with innovative steel-plastic nail.

Advantages

To set with few hammer blows.
The plate fits tight into the insulation thanks to its thickness of only 2.7 mm. Thus allows the application of low-cost, thin reinforcement layers.
High retention forces thanks to the steel tip of the compound nail.
Small anchoring depth of 35 mm saves on drilling times.
The compression zone in the shank allows the plate to be drawn in precisely.
For insulating material thicknesses up to 340 mm.

The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.

Applications

Fixing of ETICS insulation boards on concrete and masonry
Flush-to-surface installation in ETICS insulating materials like mineral wool or polystyrene

Building materials

Building material classes A, B, C, D, E
Concrete
Full blocks made from concrete
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

Detajet (materialet e ndërtimit, ngarkesat, etj.) të çdo miratimi të disponueshëm zbatohen. Dokumentet e mëtejshme mund të gjenden në Qendra e shkarkimit.

Miratimet

ETA-18/0393
DoP No. 0255
EPD-FIW-20210314-CBD1-EN

ETA Certification Document

pdf, ETA-18/0393

European Technical Assessment for fischer FIF-CN II - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Krijuar me 29.05.2018

DOP - Declaration of Performance

pdf, DoP No. 0255

Declaration of Performance for FIF-CN II (Plastic anchors for use in concrete and masonry)

Krijuar me 15.01.2021

EPD - Environmental Product Declaration

pdf, EPD-FIW-20210314-CBD1-EN

Environmental Product Declaration for fischer Insulation fixings

E vlefshme nga 22.02.2022
deri në 21.02.2027

Load Table

pdf,

Render fixing FIF-CN II - ermissible loads for a single anchor for fixing of external thermal insulation composite systems with rendering.

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth ( h₁ )	65 mm
Anchor length ( l )	348 mm
Max. fixture thickness ( t _fix )	310 mm
Disc ø	60 mm
Amount	100 pcs.
GTIN (EAN-Code)	4048962330038

fischer Render fixing FIF-CN II 8/300

Përparësitë / Përshkrimi

Aplikimi dhe leja (autorizimi)

Manuali i montimit

Të dhënat teknike

Dokumente për shkarkim