Product Category Picture
Application Picture
Application Picture
1   1

Internal threaded sockets FIS E

The internal threaded anchor for masonry and aerated concrete

The fischer internal threaded anchor FIS E is a system component for use with the fischer injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS GREEN for fixations in masonry made from solid brick, perforated brick, and aerated concrete. When the threaded anchor is installed, the mortar is pressed through the grating structure and creates a form fit with the structure of the brick. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the FIS E is particularly suited to detachable and temporary fixings both inside and outside. The approvals of the various injection mortars must be observed.

Përshkrimi i produktit

Advantages
  • The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
  • The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
  • The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
  • Please refer to the approvals for the mortar used.

Variantete produktit


6 Variante(t) e produktit te gjetura

6 Variante(t) e produktit te gjetura

ETA-approval
Drill diameter

d0

Packaging
Amount

14 [mm]

Folding box

10 [St.]

[mm]

4 [St.]

14 [mm]

Folding box

10 [St.]

[mm]

4 [St.]

18 [mm]

Folding box

10 [St.]

18 [mm]

Folding box

10 [St.]

Legjenda = Autorizimi i disponueshëm = Autorizimi i padisponueshëm
Shikuar 6 nga 6 Variant(e)
0

Aplikimi dhe leja (autorizimi)

Applications
  • Removable and temporary fixings
  • Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS GREEN in masonry and aerated concrete
Building materials
Approved for:
  • Solid sand-lime brick
  • Perforated sand-lime brick
  • Solid brick
  • Solid blocks made from lightweight concrete
  • Vertically perforated brick
  • Hollow blocks made from lightweight concrete
  • Building brick
  • Aerated concrete blocks
Also suitable for:
  • Solid and lightweight concrete blocks
  • Solid pumice and other solid building materials
Janë të vlefshme detajet e autorizimit të disponueshëm (materiale ndërtimi, ngarkesa, etj.).Dokumente të tjera i gjeni në https://www.fischer.de/sdb

Autorizimi

  • ETA-10/0383
  • ETA-15/0263
  • DoP 0195

Manuali i montimit

Functionality
  • The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW. FIS VL or FIS P can be used but do not have approvals.
  • FIS E is suitable for pre-positioned installation.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Dokumente për shkarkim

Të dhënat e produktit

Autorizimet (miratimet) dhe njohjet

Titulli Tipi Krijimi E vlefshme deri
ETA Certification Document (PDF, 21 MB) European Technical Assessment fischer Injection resin FIS V for fixing in masonry ETA-10/0383 7.7.2020
ETA Certification Document (PDF, 7 MB) European Technical Assessment for fischer injection system FIS VL for use in masonry ETA-15/0263 7.7.2020
DOP - Declaration of Performance (PDF, 7 MB) DoP 0195 4.8.2020

Komponentët e sistemit & Kategorite e përafërta me produktin

sc93-delivery-1