Nr. i Art. 519014

fischer High performance anchor FH II 15/10 H with internal thread

Top Features

Maximum installation comfort due to rapid expansion.
Visual setting control for approval-compliant fixing.
No torque wrench is required.
High flexibility: Conventional metric screws and threaded rods can be used.

The intelligent internal thread anchor with easy mounting for fixings in cracked concrete.

Advantages

The international approvals guarantee maximum safety and the best performance.
The internal threaded anchor allows the removal of the attachment and the fixing point can be reused.
The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
The optimised geometry intelligently reduces the energy required for assembly.
The approval regulates the use of hollow drills.

The fischer high-performance anchor FH II-I is an internal threaded anchor made of zinc-plated steel. The anchor is set in the pre-positioned installation. During installation with a hex driver the cone is pulled into the expansion sleeve and expands it against the hole wall. At the same time, the anchor is tightened through the compression on the black, plastic ring. This means that the anchor sleeve sits below the edge of the drill hole in an approval-compliant manner. The fischer high-performance anchor FH II-I is ideal for fixing air-conditioning units, sprinkler systems, and pipeline routes.

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Pipeline routes
Ventilation systems
Sprinkler systems

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Detajet (materialet e ndërtimit, ngarkesat, etj.) të çdo miratimi të disponueshëm zbatohen. Dokumentet e mëtejshme mund të gjenden në Qendra e shkarkimit.

Miratimet

ETA-07/0025
DoP No. 0197

Functionality

The FH II-I is suitable for pre-positioned installation.
When a hexagon wrench is used for installation, the internal thread bolt starts to rotate. This pulls the cone into the expansion sleeve and expands it against the drill-hole wall. At the same time, the anchor is tightened through compression of the black plastic ring. A gap U to the concrete surface is created (see image 4).
The anchor is set according to the approval when the gap U is 3-5 mm. Alternatively, an installation torque of T_inst can also be applied.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-07/0025

European Technical Assessment for fischer High-Performance Anchor FH II, FH II-I - Mechanical fastener for use in concrete

Krijuar me 23.09.2020

DOP - Declaration of Performance

pdf, DoP No. 0197

Declaration of Performance for fischer High Performance Anchor FH II, FH II-I (Mechanical anchor for use in concrete)

Krijuar me 06.10.2020

Load Table

pdf,

High performance anchor FH II-I - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Marketing Documents

pdf,

fischer High performance anchor FH II

ETA-approval
Drill diameter ( d₀ )	15 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4048962158281

fischer High performance anchor FH II 15/10 H with internal thread

Përparësitë / Përshkrimi

Aplikimi dhe leja (autorizimi)

Manuali i montimit

Të dhënat teknike

Dokumente për shkarkim